This Brilliant MAC AFRIC Pneumatic Spot Weld Removal Drill is capable of accurately removing spot welds from tough materials without distorting the original material! An air consumption rate of 8 CFM with a working pressure of 6.2 BAR power is never an issue! This tool efficiently uses this pressure to generate 1400 RPM ensuring that you can easily drill through almost any material!
| Attribute Label | Value |
|---|---|
| Air Consumption | 8 CFM (226L/MIN) |
| Chuck Size | 8 mm |
| Chuck Type | Collet Tightened |
| Inlet Size | 1/4″ |
| No Load Speed | 1 400 RPM |
| Package Height (cm) | 5.60 |
| Package Length (cm) | 32.00 |
| Specifications Description | #html-body [data-pb-style=C6EOFP3]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}#html-body [data-pb-style=DF07R3R]{text-align:center}
Support the work area from the other side.
Throat: 80mm Length: 290mm Tips for Spot WeldingFirst of all a shallow pilot hole should be drilled into the centre of the spot-weld. The Spring-loaded guide pin will then be placed into the pilot hole. The Cutter then quickly removes the material around the spot weld, creating a clean and precise hole in place of the spot-weld! |
| Working Pressure | 6.2 BAR (90 PSI) |
No products in the cart.
Reviews
There are no reviews yet.